Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Windows for villas
A villa is the one property where the whole envelope is yours to decide, and that turns out to be the hard part rather than the easy one. Each elevation takes a different amount of sun, the majlis and the family rooms are used at different hours, the ground floor is reachable from the garden and the first floor is not. A specification written for the house as a single object gets all of that wrong in the same direction. One written room by room usually costs less overall, because the expensive glass goes only where it earns its place.
- per elevation how it is specified
- majlis and family zones treated apart
- blockwork openings what we fit into
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
What changes room to room in a villa
-
Sun path
Elevation
West rooms are a separate order
-
Reachable or not
Ground floor
Laminated glass facing the garden
-
Guest hours
Majlis
Used late and cooled hard
-
Wide openings
Garden rooms
Sliding runs onto the terrace
-
Lintel and reveal
Structure
What an enlarged opening needs
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
How a villa job runs
- An engineer walks the plot within 48 hours Every elevation measured, none sampled
- Community guidance checked before design Some compounds fix the external colour
- Openings widened only where structure allows Lintels quoted with the windows
- Glass chosen per room, not per house West and south priced on their own
- Manufactured in our own Dubai factory Cut to the sizes from the survey
- Fitted in phases so the house stays lived in One wing at a time if you are there
Partitions
Office partitions made of aluminium profiles are a simple, quick, and cost-effective way to organise efficient zoning within a large space, while maintaining interior unity.
-
Aluminium office partitions with glass
-
Full-glass office partitions
-
Transformable partitions for the office
-
Accordion partitions for the office
The honest downside
When a whole-house order is the wrong start
Replacing every window at once is the biggest version of the job: every room sheeted in turn, lintels wherever openings grow, and a long run of decisions about colour, glass and divisions. Where the frames are sound, much of that effort goes into windows that were not the problem.
Enlarging openings has a cost that outlasts the works, too. More glass on a west or south wall is more heat for the air conditioning every afternoon, and wider openings at ground level are more to secure.
If the frames close well and the complaint is fogging between the panes or one hot elevation, replacing the glass units in those windows is often enough. A full villa replacement is the right answer where the frames have no thermal break, the sashes have dropped or the seals have failed across the house.
Consider instead
Glass unit replacement
Frequently asked questions
Often yes, and it is worth asking early, because it is a structural question before it is an architectural one. A wider opening in a blockwork wall needs a lintel sized for what sits above it, and occasionally a column; our engineer traces the load path during the survey and we quote the builder's work alongside the windows rather than leaving you to coordinate two trades. Where the wall is carrying something awkward we usually find more glass by changing the frame divisions inside the existing opening instead.
It shapes the choice rather than blocking it. Most established communities care about what the street sees — external colour, frame proportion, sometimes the reflectivity of the glass — and are indifferent to what happens on the inside face. Aluminium suits that well, because the two faces of one profile can be finished differently, so the elevation matches the neighbours while the rooms get the colour you actually wanted. We ask for the community's guidance note before drawing anything.
Usually not. A villa has enough rooms to work through in phases, so the work is planned a wing or a floor at a time, with the working area sealed off and each day arranged so the rooms you sleep in are either finished or untouched. What we do ask for is a decision on the phasing during the survey, because it changes the delivery sequence out of the factory.
The survey happens within 48 hours of your call, and manufacturing runs three to five weeks from the drawing you approve — counted from the drawing, not from the deposit. Fitting a whole villa is then a matter of days spread across the phases you agreed. The part that stretches is the deciding: colour, glass and frame divisions room by room, which is why samples are worth seeing in person — on a second visit or at the showroom — rather than chosen from an emailed list.
Aluminium windows of any configuration
Made to size in our own factory in Dubai — in 3–5 weeks.
We will find convenient opening options:
Related pages
Nearby pages and the rest of the catalogue.
- Aluminium-wood windows
- Arched windows
- Bay windows
- Casement windows
- Corner windows
- Custom shapes
- Double-panel windows
- Energy efficient windows
- Fire-rated windows
- Fixed windows
- Floor-to-ceiling windows
- Folding windows
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 