Entrance doors
The one door in a home that separates conditioned air from a porch, a car park or the open street. Everything else follows from that: a thermal break running through the profile, a sealed threshold that dust cannot creep under, and hardware rated for a leaf somebody pushes and pulls a dozen times a day. Leaf, frame and threshold leave our Dubai factory as one set, so the parts match rather than merely fit.
- swing or pivot leaf action
- multi-point locking
- thermal break profile
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
How we get from a doorway to a fitted door
- Engineer measures the structural opening On site within 48 hours
- Exposure of the entrance agreed Open porch or sheltered lobby
- Leaf action and swing side settled Where the leaf lands when it opens
- Lock, cylinder and handle set chosen Matched to how the household comes and goes
- Fabrication in our own Dubai workshop Three to five weeks from the signed drawing
- Fitting, sealing and final adjustment Leaf adjusted once the frame is fixed
What an entrance door is made of
-
Thermal break
Frame
Polyamide bar splits inside from outside
-
Multi-point
Lock
Hooks engage at top, middle and bottom
-
Sealed
Threshold
Continuous gasket line under the closed leaf
-
Load-rated
Hinges
Selected for the weight of the leaf
-
Coated or anodised
Finish
Full RAL palette, or anodising
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Articles
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
The honest downside
When a single entrance door is not enough
An entrance door keeps cooled air in only while it is shut. At a home this barely matters. At an office, clinic or shop entrance used all morning, every opening swaps chilled air for hot, dusty air, and on a windy podium that becomes a steady draught down the hall.
Exposure is the other limit. An unshaded leaf facing west warms on its outer face, and a dark finish adds to it. The thermal break keeps the handle comfortable, but no profile can stop the sand carried in on the air that comes through an open leaf.
Where the entrance serves a steady flow of people, a vestibule — two door sets with a short lobby between them — means one of them is usually shut while the other is open. For a home, or an office with occasional visitors, a single well-sealed entrance door remains the right choice and takes no extra floor space.
Consider instead
Vestibule doors
Frequently asked questions
Security comes from the lock case, the cylinder and the number of points the leaf latches at — not from what the frame is made of. An aluminium frame carries a multi-point lock and a reinforced keep exactly as a steel one does, and it will not swell in UAE humidity, so the lock keeps meeting its strike plate season after season.
An unshaded leaf facing west absorbs the sun and its outer face does warm up. The thermal break stops most of that crossing to the inner skin, which is why the handle you actually touch stays comfortable. A deep porch or a lighter finish reduces it further.
Yes — the same coating line and the same RAL reference serve both, so a door and window frames ordered together can be coated in one colour batch. When you replace in stages, the reference is kept on file so a later order is coated to the same reference.
It comes out, the opening is cleaned back to sound substrate, and the new frame is fixed and sealed against it. Reveals and skirting details are made good, and debris removal is agreed as part of the job.
Related pages
Nearby pages and the rest of the catalogue.
- Apartment doors
- Automatic doors
- Balcony doors
- Bi-fold doors
- Black doors
- Bronze doors
- Brown doors
- Corner sliding doors
- Double-leaf doors
- Fire-rated doors
- French doors
- Glass doors
Sections
Company
We are always happy to welcome you at our showroom
Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 