Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Dubai Hills Estate
Nothing here is old enough to be worn out, so the work is not repair. Houses and townhouses are handed over with floor-to-ceiling glazing already in place, and what owners ask for is a change to it — a solar-control unit on the elevations that face the golf course and take the full afternoon, a terrace closed in, a fixed pane turned into something that opens. Because the community is still being finished, the site rules are a builder's rules: passes at the gate, agreed working hours, and a route through streets that are shared with construction traffic. The easiest moment is the gap between handover and moving in, when the house is empty and a full-height pane can be brought through it without furniture in the way.
- upgrade, not repair usual reason to call
- floor to ceiling what is already there
- before move-in easiest window to use
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
How work in a new community runs
- Survey of the glazing as delivered Engineer on site within 48 hours
- What the developer allows checked first Fit-out rules apply through handover
- Orientation of each glazed room recorded Which elevations actually overheat
- Gate passes and working hours arranged Streets shared with construction traffic
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Booked before the furniture arrives Where the house is not yet occupied
What a new-build job involves
-
Handover glazing
Starting point
Altered rather than torn out
-
Golf and park side
Afternoon sun
Solar-control unit or external shading
-
Ventilation added
Sealed panes
A fixed light made to open
-
Gate pass
Site access
Community still under construction
-
Full-height
Panes
Route through the house planned first
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
New is not the same as suited to the room. A house is glazed to one specification all the way round, and the elevation looking over the golf course late in the day is being asked to do something the shaded side never is. What owners notice first is one or two rooms the cooling cannot hold, or glare that makes a room unusable at a particular hour. The answer is usually the glass rather than the frame — a solar-control unit into the existing profile — with external shading added only where the sun comes in too low for glass alone to deal with.
In many cases, yes. If the profile is sound and the hardware carries the weight, the glazing unit can be taken out of the existing frame and a solar-control or laminated one put back in its place — faster, cheaper and far less invasive than a new frame. It is not always possible: a heavier unit changes what hinges and rollers are being asked to carry, and a deeper unit has to fit the rebate it is going into. Establishing which case you are in is what the survey is for.
Through the handover period, yes. While a community is still being completed the developer's fit-out rules govern what an owner may change and who is allowed to work in the house, which in practice means our trade licence, a description of the work and the crew's names for the gate. Anything that alters the outside — a new opening, a closed terrace, a different frame colour — is a separate approval and is worth starting early, because that item usually sets the date rather than the manufacturing does.
Considerably. An empty house means a full-height pane can be carried straight through it, there is no furniture to sheet, no cooling to maintain around a family and no household hours to work around. Where the house is already lived in the same work is done room by room instead, each one opened and closed within the day. If your handover date is known, booking the survey against it is what makes that empty stretch usable rather than missed.
Brands we work with
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
- MBR City
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 