REHAU systems
A German company from the town of Rehau in Bavaria, and one of the largest makers of uPVC window and door profiles anywhere. It sits on a list otherwise full of aluminium names for one honest reason: when the complaint is noise, a chambered plastic frame with seals running right around the sash is the cheaper way to fix it. That is a real brief in Dubai — flats facing Sheikh Zayed Road, a chiller yard, a school run or a construction site that will be there for two more years. We fabricate REHAU profiles to the manufacturer's specification in our Dubai factory and fit them with our own crews.
- Rehau, Bavaria where the company began
- uPVC profile what the frame is made of
- multi-chamber how the section is built
What makes a plastic window quiet
-
Chambered section
Profile
Air pockets break the path of sound
-
Seals all round
Sash
Continuous contours, no gap to leak through
-
Unequal panes
Glazing
Two thicknesses beat two identical ones
-
Low conductivity
Material
Plastic passes far less heat than metal
-
Tilt or turn
Opening
Vent on the tilt, clean the glass on the turn
REHAU systems by type
The REHAU range, grouped by what each series is for. Figures are the manufacturer's published data, and each card links to its source. Which series fits your opening is settled at the free survey.
REHAU windows
Casement, tilt-and-turn and fixed windows. The series differ in profile depth, the thickest glass they take and how much heat the frame lets through.
All window types-
Window · uPVC · balcony doors · terrace doors
REHAU ARTEVO
80 mm window and balcony/terrace-door system in glass-fibre reinforced RAU-FIPRO X, mostly without steel reinforcement, for large, well-insulated openings; ARTEVO max adds a LowE film in the profile.
- Construction depth
- 80 mm
- Uf (frame)
- up to 0.97 W/(m²K)
- Uw (window)
- as low as 0.61 W/(m²K)
- Maximum pane thickness
- 56 / 72 mm (72 mm with flush sash)
- Sound insulation Rw
- up to 48 dB
-
Window · uPVC · tilt-and-turn · balcony door
REHAU EURO-DESIGN 70
70 mm five-chamber uPVC tilt-and-turn window system in the UV-resistant RAU-PVC 1476 formulation for hot climates; sashes also for balcony and entrance doors.
- Construction depth
- 70 mm
- Chambers
- 5
- Maximum pane thickness
- 41 mm
- Uw (window)
- up to 1.3 W/m²K
- Sound insulation
- up to Rw = 44 dB
-
Window · uPVC · balcony doors · patio doors
REHAU SYNEGO
80 mm uPVC system for windows and balcony/patio doors, the base of the SYNEGO family that the SYNEGO SLIDE brochure presents.
- Overall depth
- 80 mm
- Uf (frame)
- up to 0.94 W/(m²K)
- Sound insulation Rw
- up to 47 dB (ISO 10140-2)
- Burglar resistance
- up to RC 3
- Watertightness
- up to 9A
REHAU doors
Entrance, terrace and balcony doors. What sets the series apart is how heavy a leaf they carry, the threshold and the locking options.
All door types-
Door · uPVC · front (entrance) door
REHAU SYNEGO front doors
80 mm uPVC entrance-door system from the SYNEGO family; panel choice sets the acoustic value.
- Overall depth
- 80 mm
- Visible width of frame/sash
- 174 mm
- Uf (frame)
- 1.2 W/(m²K)
- Burglar resistance
- up to RC 2
REHAU sliding systems
Sliding and lift-and-slide doors for wide openings onto a terrace or pool. The series differ in panel weight, the width of the meeting stile and the threshold height.
Sliding doors-
Sliding · uPVC
REHAU SYNEGO SLIDE
uPVC sliding window and door system whose sash is pressed against the frame on closing for an all-round seal; sashes run parallel to the wall.
- Construction depth frame / sash
- 156 / 80 mm
- Maximum size
- 4 x 2.6 m
- Uf (frame)
- up to 1.3 W/(m²K)
- Sound insulation Rw
- up to 44 dB (ISO 10140-2)
- Burglar resistance
- up to RC 2
-
Sliding · uPVC · lift-and-slide door
REHAU SYNEGO lift and slide doors
uPVC lift-and-slide door system from the SYNEGO family for wide patio openings, with an optional panoramic sash.
- Construction depth frame / sash
- 190 / 80 mm
- Visible width of frame/sash
- 179 mm
- Uf (frame)
- up to 1.3 W/(m²K)
- Sound insulation Rw
- up to 43 dB (ISO 10140-2)
- Watertightness
- up to 9A
-
Sliding · uPVC · centre-opening
REHAU SLINOVA sliding door
Slim-profile uPVC sliding door on dual or triple tracks in 2, 3, 4 or 6-pane layouts, with multi-point locks concealed in the sash.
- Frame depth
- 80 / 146 mm
- Maximum glass thickness
- 32 mm
- Maximum sash weight
- up to 150 kg
- Maximum dimensions
- 4 x 2.4 m (W x H)
- Sound reduction
- up to Rw,P = 33 dB
Values are the manufacturer's published figures for the series; the actual value depends on the configuration — glass, size and hardware.
Profile Systems
-
Schuco
Learn more about SchucoSchüco aluminium systems carry large panes on slim frames — for villas, apartments and offices where the view matters.
-
GUTMANN
Learn more about GUTMANNGUTMANN systems are offered by Gutmann Middle East LLC, based in Dubai Investments Park: hinged windows and doors, sliding and lift-and-slide doors, curtain walls and glass railings
-
Deceuninck
Learn more about DeceuninckDeceuninck uPVC profiles are designed in Belgium for superior insulation, weather resistance and a sleek finish. A popular choice for energy-efficient homes across Europe
-
Cortizo
Learn more about CortizoCortizo aluminium systems combine precise Spanish engineering with high thermal and acoustic performance. A reliable choice for windows, doors and facades that need to perform in demanding climates
-
Montana 120
Learn more about Montana 120Montana 120 is a thermal-break sliding series from Gulfex (Gulf Extrusion LLC), with the profile extruded here in Dubai. A straightforward choice for sliding windows and balcony doors of ordinary size
-
TB-600
Learn more about TB-600TB-600 is the thermal-break hinged window and door series of Gulfex (Gulf Extrusion LLC). The profile is extruded in Dubai, and the same maker covers sliding, folding and curtain-wall systems
-
ALUK
Learn more about ALUKALUK is an Italian aluminium systems brand known for slim, minimalist frames that maximise glass area without compromising strength. Perfect for architectural projects that call for a light, contemporary look
-
Vetromax
Learn more about VetromaxVetromax combines advanced glazing technology with aluminium framing for maximum light, strength and energy efficiency. A modern solution for panoramic windows and glass facades
-
REHAU
Learn more about REHAUREHAU uPVC systems are engineered in Germany for outstanding thermal insulation, soundproofing and long-term durability. A proven choice for energy-efficient windows and doors worldwide
What we do on a REHAU order
- The noise source found before anything is priced Road, plant room, flight path or neighbour
- Opening measured and checked for square Engineer out within 48 hours
- Sash sizes kept inside sensible spans Split into more leaves rather than stretched
- Glass build-up chosen against that noise Unequal panes, laminated where it earns its place
- Fabrication to REHAU's specification Welded, reinforced and glazed in Dubai
- The reveal sealed as carefully as the window A gap around the frame undoes the frame
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Profile Options
Consult with a specialist
Profile finish and coating options
Powder coating in any shade of the RAL palette; the colour is confirmed against a physical sample at the survey.
Anodising builds an oxide layer on the profile itself, so the colour belongs to the metal rather than to a film on top of it and cannot peel.
Wood-grain and stone-effect finishes are transferred onto the powder coating. The profile keeps the strength of aluminium and never needs repainting.
Available colours (200+ RAL shades)
- White
- Anthracite
- Brown
- Black
- Grey-anthracite
- Grey
Anodised finishes
- Natural silver
- Champagne
- Light bronze
- Medium bronze
- Dark bronze
- Black anodised
Wood-grain and special effects
- Golden oak
- Walnut
- Dark oak
- Concrete
- Basalt
- Wenge
Articles
Our main products
Our company manufactures aluminium structures with subsequent installation at the glazing site.
Visit our window design showroom
See profiles, glass units and hardware in person and meet the engineers who draw your project. Come with the plans or photos of the openings.
The Pinnacle Building · Sheikh Zayed Road
- Address
- The Pinnacle Building, Sheikh Zayed Road, Office 607, Dubai
- Hours
- Mon–Fri: 9:00 – 18:00
Popular ready-made solutions
- Villa glazing
- Classic windows
- French windows
- Tilt-and-turn windows
- Top-hung windows
- Patio door
- Classic door
- Panoramic sliding doors
- Panoramic folding accordion doors
Garden room at a villa
Thermal-break frames and solar-control glass
Two-storey villa glazing
Sliding doors to the terrace, windows above
Panoramic villa glazing
Slim frames, glass from floor to ceiling
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
In the same money, usually yes — but not for the reason people assume. Most of the sound comes through the glass and through the gaps, not through the frame, so the biggest wins are two panes of unequal thickness, a laminated inner leaf and seals that actually close all the way round. What the plastic section adds is the last part of it cheaply: a chambered profile is a poorer sound bridge than a metal one, so the frame stops being the weak point. An aluminium window can be built just as quiet; it costs more to get there.
When the drawing shows big glass or a hard elevation. A living room that opens onto a terrace in one clear field, a balcony door on the thirtieth floor, anything where the wind calculation has to be signed — those are aluminium jobs, because metal holds a slim section straight under load and plastic does not. There is also a mixed answer we suggest often: aluminium on the exposed side of the flat, REHAU on the bedrooms behind it, one colour across the elevation so it reads as a single decision.
The temperature difference is the easy part — that is precisely what a low-conductivity material is good at, and it is why an aluminium window needs a polyamide thermal break to compete. The harder part is movement, because plastic expands with heat far more than aluminium, and the bigger the sash and the darker the finish, the more that shows up as a window which suddenly closes stiffly in August. It is managed by keeping sashes modest, choosing pale colours on sun-facing walls, and leaving the fitting tolerances the manufacturer asks for.
No. We are not licensed by REHAU or by any other European systems house, and we would not print that claim on a quotation. The arrangement is simpler than a licence: branded profile, gaskets and hardware from the manufacturer's supply, then welding, reinforcement, glazing, fitting and adjustment done by us in Dubai to their published specification. Alongside that we build our own aluminium windows in the same factory — a separate line, priced separately, and always named as ours on the quote.
REHAU systems
Every page of this section, in one place.
- REHAU ARTEVO
- REHAU EURO-DESIGN 70
- REHAU SLINOVA sliding door
- REHAU SYNEGO
- REHAU SYNEGO SLIDE
- REHAU SYNEGO front doors
- REHAU SYNEGO lift and slide doors
Sections
Company
We are always happy to welcome you at our showroom
Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 