uPVC windows and doors for villas and apartments in Dubai
uPVC windows and doors suit ordinary openings where the problem is traffic noise or afternoon heat: a multi-chamber plastic frame seals tightly, insulates well and costs less than aluminium for the same opening. We supply and install REHAU, VEKA and Deceuninck systems in villas and apartments across Dubai. Message or call, and a surveyor comes within 30 minutes.

Types of uPVC windows and doors

One handle opens the sash into the room or tilts it at the top for airing; we fit them in apartments too, the permission is in place. REHAU SYNEGO, EURO-DESIGN 70.
Learn more →
Panels run past each other in the frame plane, nothing swings into the room. Deceuninck sliders are the uPVC system we fit most: white only, glass up to 30 mm. REHAU SYNEGO SLIDE, SLINOVA.
Learn more →
The handle lifts the leaf, it rolls, then sits down on a continuous seal. REHAU SYNEGO lift-and-slide, Deceuninck HS76.
Learn more →
For townhouse and apartment entrances and doors from a garage or service yard. REHAU SYNEGO front doors.
Learn more →
uPVC or aluminium: choose by the opening
Neither material is better everywhere. A uPVC frame is a good insulator with a steel or glass-fibre core inside; an aluminium frame is a strong section with insulation engineered into it. That difference decides where each belongs.
in bedrooms and studies on a busy road, bathrooms, stores, staff rooms and whole apartments with ordinary window sizes. Several sealing lines with acoustic glass give a quiet room for less than aluminium.
on wide terrace doors, floor-to-ceiling glass, high floors where wind pressure grows, and anywhere the frame has to look slim.
Plastic expands more than aluminium, so large uPVC units are drawn conservatively here and dark finishes are chosen with care. White and light laminated colours are the safe choice on a west wall.
Many villas end up aluminium where openings are big and seen, uPVC in utility rooms. The split and the outside colour are fixed on the drawing.
The full comparison is in the article Aluminium or uPVC.
Systems we work with
Manufacturers’ published figures; your surveyor sizes each sash to the opening.
| System | Depth, chambers | Strong point | Published maximums |
|---|---|---|---|
| REHAU SYNEGO | 80 mm, 7 chambers in the frame | Rw up to 47 dB, burglar resistance up to RC 3 | sash up to 1600 mm wide or up to 1700 mm high (window), up to 1300 mm wide or up to 2500 mm high (balcony door), 130 kg |
| REHAU ARTEVO | 80 mm, glass-fibre reinforced, mostly no steel | Rw up to 48 dB, glass up to 56 mm | water up to 9A, wind up to B5 |
| REHAU EURO-DESIGN 70 | 70 mm, 5 chambers | Rw up to 44 dB, RC 2 | glass up to 41 mm |
| Deceuninck Legend | 80 mm, 6 chambers | Uf 0.92 W/m²K | glass up to 52 mm |
| Schüco LivIng 82 MD | 82 mm | Rw 47 dB, zero threshold option | sash up to 1500 mm wide or 2600 mm high, 120 kg |
Glass and frame for the UAE climate
- Glass does most of the work. We make the glass units in our own factory. A solar control coating, the strongest on west and south walls, moves more heat than the choice of frame; the Dubai Building Code limits the shading coefficient of every window. Acoustic laminated glass reaches up to 43 dB (Rw+Ctr) for a bedroom by a highway or under a flight path.
- Reinforcement. Sashes and frames that carry load get a steel core; REHAU ARTEVO and Deceuninck Elegant use glass fibre instead.
- Colour. White is the default, and the Deceuninck sliders we fit are white only; REHAU offers laminated wood and grey finishes, and on a sunny elevation darker colours are specified with extra care because the profile heats up and moves more.
Five taps to your quote
Where is the opening?
What do you need?
Rough size of the opening
Which glass?
Where should we send the quote?
Read before you choose
From survey to installation
One contract, one warranty
- 2 years on installationOur crews fit what our factory makes, so there is one company to call.
- Terms in the contractThe warranty period and what it covers are set down in writing before work starts.
Examples of our work
The team behind your windows
Engineers, installers and the office in Dubai, all in one uniform.








Reviews and manufacturer training
A letter from Gutmann Middle East dated 29 September 2026 confirms that five of our staff completed training in fabricating and installing its systems.
Questions about uPVC windows
Can uPVC windows take the UAE heat?
Yes, when the profile comes from an established systems house: it is stabilised against ultraviolet light and made for hot markets. The frames that yellow and crack here are almost always unbranded profile bought on price. Ask which system is in the quote and who makes it.
Does white uPVC turn yellow?
Branded white profile is made to keep its colour in strong sun. Yellowing points to cheap profile without a traceable system behind it. Gaskets are the part that ages first in the sun, on uPVC and aluminium alike, and they are replaced on a service visit.
How long do uPVC windows last?
The profile outlasts the parts that wear: gaskets harden in direct sun, drainage channels fill with sand, hardware wants adjusting. A sash replacement years later depends on that profile still being stocked, which is an argument for a widely supplied system such as REHAU or Deceuninck.
Is uPVC cheaper than aluminium?
For an ordinary rectangular opening, uPVC is the less expensive way to a tight, quiet, well insulated window, and the saving often pays for better glass. Large, high or slim openings stay aluminium whatever the budget. The exact figure comes with the quote after the survey.
Can I fit uPVC windows in an apartment?
Yes, tilt-and-turn included: the permission is in place. The building or developer often fixes the outside look, sometimes the material too, so we check with the management company before drawing.
19 brands we fabricate
19 profile brands: 15 aluminium and 5 uPVC, with Schüco in both lists. The main series have their own pages with technical data and a cross-section.

See and touch the systems before you choose
- Profile samples of every brand
- Glass units and finishes
- Hardware and handles
The Pinnacle Building, Sheikh Zayed Road, office 607, Al Barsha First
Monday to Friday, 9:00–18:00








