Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Black doors
Black suits a contemporary facade, and it is the finish that argues hardest with this climate. A dark leaf in unshaded sun absorbs nearly everything that reaches it, so the outer skin gets genuinely hot, expands more than a pale one would and passes that warmth inwards unless the profile is broken. None of that rules black out. It changes what has to sit under the coating and, very often, what goes on the inside face.
- matt or textured sheen
- dual colour inner face
- thermal break recommended
Profile Options
Consult with a specialist
Profile finish and coating options
Powder coating in any shade of the RAL palette; the colour is confirmed against a physical sample at the survey.
Anodising builds an oxide layer on the profile itself, so the colour belongs to the metal rather than to a film on top of it and cannot peel.
Wood-grain and stone-effect finishes are transferred onto the powder coating. The profile keeps the strength of aluminium and never needs repainting.
Available colours (200+ RAL shades)
- White
- Anthracite
- Brown
- Black
- Grey-anthracite
- Grey
Anodised finishes
- Natural silver
- Champagne
- Light bronze
- Medium bronze
- Dark bronze
- Black anodised
Wood-grain and special effects
- Golden oak
- Walnut
- Dark oak
- Concrete
- Basalt
- Wenge
Getting black right
- Orientation and shading measured on site Engineer attends within 48 hours
- Shade of black judged with the sample in sun Jet black and graphite look alike indoors
- Thermal break confirmed for exposed leaves Especially facing west and south
- Inner face colour decided A pale room side keeps the hallway lighter
- Coated and cured in our own facility Three to five weeks from the approved drawing
- Handles and hinges matched to the finish Bright steel jumps out against black
What a dark finish demands
-
Absorbs heat
Outer face
Dark surfaces run hot in direct sun
-
Thermal break
Profile
Keeps that heat off the inner skin
-
Dual colour
Option
Black outside, a lighter shade indoors
-
Matt
Sheen
Hides dust and fingerprints better than gloss
-
Anodising
Alternative
Dark anodised finish instead of coating
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Aluminium windows of any configuration
Made to size in our own factory in Dubai — in 3–5 weeks.
We will find convenient opening options:
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
The honest downside
When black is the harder finish to live with
On an unshaded west or south elevation, a black leaf works against the sun all afternoon. It runs hotter than any lighter shade, moves more as it heats, and needs a thermal break and carefully set gaskets just to behave like a paler door.
Black also shows what the climate leaves on it. The fine beige dust that settles between cleans, drying marks after a rinse and the light scratching of blown sand all read clearly on a dark surface, even in matt, so an exposed black door asks for more cleaning than most owners expect.
For a fully exposed entrance, the grey family is the easier choice: anthracite keeps a dark look, still shows the modelling of the profile and runs a little cooler, while a mid grey hides settled dust far better. Black stays the right choice under a deep porch or in a shaded reveal, ideally with a lighter room side.
Consider instead
Grey doors
Frequently asked questions
The outer face of an unshaded black leaf does become uncomfortable in the afternoon; that is physics rather than a defect. What your hand actually meets is the handle and the inner face, and a thermal break keeps both near room temperature. A porch or a deep reveal removes the question altogether.
Not a well-made one, but it does move it. Aluminium expands as it warms and a dark leaf warms more, so tolerances and gasket compression are set with that in mind. Doors set to a tight gap in the cool of the morning are the ones that bind at four in the afternoon.
Matt, in very nearly every case here. Gloss black is a magnet for dust film, fingerprints and the fine scratching blown sand leaves behind, and each of those shows as a bright mark on a shiny dark surface. A matt or finely textured finish diffuses the lot.
Yes. A profile can be coated in two shades, so the facade keeps its black while the hallway gets warm grey, white or a wood effect. It is a factory operation and costs a little more than a single shade — usually worth it in rooms where black feels heavy.
Related pages
Nearby pages and the rest of the catalogue.
- Apartment doors
- Automatic doors
- Balcony doors
- Bi-fold doors
- Bronze doors
- Brown doors
- Corner sliding doors
- Double-leaf doors
- Entrance doors
- Fire-rated doors
- French doors
- Glass doors
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 