Skip to content
Aluminium lift-and-slide door slid open onto a villa pool terrace, lever handle up
  • SLIDING SYSTEM
  • GUTMANN

GUTMANN GLS 125 SG

GLS 125 SG is the SG version of the GUTMANN GLS 125 lift-and-slide window and door, with the same 125 mm frame and 52.5 mm sash. Panels go up to 3000 × 3000 mm and 400 kg with glass up to 42 mm, and watertightness is published at 1050 Pa. The one published difference from GLS 125 is the wind class: C4/B5 instead of C5/B5.

  • 125 / 52.5 mm Frame / sash depth
  • up to 400 kg Sash weight
  • up to 42 mm Glass thickness
Get a price

Technical data

SG version of the GLS 125 lift-and-slide door: the same 125 mm frame, 52.5 mm sash and panel limits, published with wind load class C4/B5.

Values are the manufacturer's published figures for the series; the actual value depends on the configuration — glass, size and hardware. Which series fits your opening is settled at the free survey.

Manufacturer data
System type
Sliding system
Material
aluminium
Opening
lift-and-slide
Frame / sash depth
125 / 52.5 mm
Sash size
up to 3000 × 3000 mm
Sash weight
up to 400 kg
Glass thickness
up to 42 mm
Watertightness
1050 Pa
Wind load resistance
Class C4/B5
Air permeability
Class 4

GLS 125 SG is listed in the UAE by Gutmann Middle East LLC, Dubai Investment Park 2. We fabricate it at our Dubai factory to the manufacturer's specification and fit it with our own crews.

Same panel limits as GLS 125

Frame and sash depth, panel size, panel weight, glass thickness, watertightness and air permeability class 4 are published the same for both versions. So GLS 125 SG covers the same openings: wide terrace and balcony doors in villas and apartments with heavy panels that should still move lightly. The supplier's page does not explain what the SG version changes in the build, so we confirm the detail with the supplier when a project calls for it.

What the wind class means

In a wind class such as C4/B5 the number is the test pressure level and the letter is the deflection limit, C being stricter than B. GLS 125 is published at C5/B5, GLS 125 SG at C4/B5. On a low-rise villa that difference rarely decides anything; on a high, exposed floor the facade engineer checks the panel size against the wind load and may point to GLS 125.

Glass up to 42 mm takes solar-control and laminated layers, and the thermal value of the finished door is confirmed by calculation before the order.

GLS 125 SG is a lift-and-slide door with GLS 125 panel limits up to 3000 × 3000 mm and 400 kg, published one wind class lower, chosen when the project calls for the SG version.

Other GUTMANN systems

Other series from the same range — compare the figures before the survey.

  • Sliding

    GUTMANN SC89

    Sliding door with a 98 mm frame and a 35 mm sash profile for medium-size panels.

    Frame / sash depth
    98 / 35 mm
    Sash size
    up to 2200 × 2400 mm
    Sash weight
    up to 110 kg
    Glass thickness
    24–28 / 30 mm (sash type 1 / 2)
    Watertightness
    450 Pa (ASTM E 331-00)
  • Sliding · single track (monorail) · lift-and-slide (option)

    GUTMANN SC115

    Sliding window and door with a 115 mm frame and a 50 mm sash, available as a single-track monorail with curtain wall integration and with a lift-and-slide option.

    Frame / sash depth
    115 / 50 mm
    Sash size
    up to 3000 × 3000 mm
    Sash weight
    up to 200 kg
    Glass thickness
    up to 42 mm
    Watertightness
    E800
  • Sliding · raised, hidden or semi-concealed track

    GUTMANN Vision One

    Sliding door with a 159.6 mm frame and a 63 mm sash for tall panels, with concealed handles, multi-point locking and raised, hidden or semi-concealed tracks.

    Frame depth
    159.6 mm
    Sash depth
    63 mm
    Sash size
    up to 1500 × 4000 mm
    Sash weight
    up to 300 kg
    Glass thickness
    32 mm
  • Sliding · single, double or triple track · corner-free (360°)

    GUTMANN Horizon Minimal Slim Slider

    Minimal-frame slider in two versions, SOL and LUNA, on stainless steel rollers and tracks; the frame can be built into the wall, ceiling and floor.

    Sash weight (LUNA)
    up to 1000 kg
    Glass thickness (LUNA)
    up to 54 mm
    Sash size (LUNA, W × H)
    up to 3000 × 6500 mm
    Sash weight (SOL)
    up to 500 kg
    Glass thickness (SOL)
    up to 36 mm
  • Sliding · lift-and-slide

    GUTMANN GLS 125

    Lift-and-slide window and door with a 125 mm frame and a 52.5 mm sash for heavy panels up to 3 m wide and 3 m high.

    Frame / sash depth
    125 / 52.5 mm
    Sash size
    up to 3000 × 3000 mm
    Sash weight
    up to 400 kg
    Glass thickness
    up to 42 mm
    Watertightness
    1050 Pa
  • Sliding · lift-and-slide

    GUTMANN GLS 180

    Lift-and-slide door with an 80 mm leaf for large glazed openings, built from straight-cut profiles with a symmetrical design inside and out.

    Leaf depth
    80 mm
    Glass thickness
    up to 60 mm
    Sound insulation
    up to 44 dB
    Burglar resistance
    up to RC 2 / WK 2
    Watertightness
    E1350
Modern villa with panoramic aluminium glazing and a pool at sunset

Get a price for this system

Send the opening sizes or a photo and we reply in WhatsApp within 15 minutes, and an engineer measures on site within 30 minutes, free.

The honest downside

When to take GLS 125 instead

If nothing in the design asks for the SG version, there is no published reason to prefer it: the figures are the same and the wind class is one step lower. On high or very exposed elevations that lower class counts.

In that case GLS 125 gives the same 3000 × 3000 mm and 400 kg panels, the same 1050 Pa watertightness and wind class C5/B5.

GUTMANN GLS 125 Consider instead GUTMANN GLS 125

Frequently asked questions

The supplier's page does not explain it. All published figures match GLS 125 except the wind class, and we confirm the build difference with the supplier for your project.

For most villa terraces both cover the same panels. Unless the architect specifies the SG version, we usually start from GLS 125 because of its higher published wind class.

Up to 3000 mm wide and 3000 mm high, with a weight up to 400 kg and glass up to 42 mm.

Send drawings or sizes on WhatsApp; we reply within 15 minutes. An engineer can measure on site within 30 minutes, free.

Profile Systems

  • Schuco aluminium profile system cross-section

    Schuco

    Schüco aluminium systems carry large panes on slim frames, for villas, apartments and offices where the view matters.

    Learn more about Schuco
  • GUTMANN aluminium profile system cross-section

    GUTMANN

    GUTMANN systems are offered by Gutmann Middle East LLC, based in Dubai Investments Park: hinged windows and doors, sliding and lift-and-slide doors, curtain walls and glass railings

    Learn more about GUTMANN
  • Deceuninck uPVC profile system cross-section

    Deceuninck

    Deceuninck uPVC profiles are designed in Belgium for superior insulation, weather resistance and a sleek finish. A popular choice for energy-efficient homes across Europe

    Learn more about Deceuninck
  • Cortizo aluminium profile system cross-section

    Cortizo

    Cortizo aluminium systems combine precise Spanish engineering with high thermal and acoustic performance. A reliable choice for windows, doors and facades that need to perform in demanding climates

    Learn more about Cortizo
  • Gulfex Montana 120 aluminium profile system cross-section

    Montana 120

    Montana 120 is a thermal-break sliding series from Gulfex (Gulf Extrusion LLC), with the profile extruded here in Dubai. A straightforward choice for sliding windows and balcony doors of ordinary size

    Learn more about Montana 120
  • Gulfex TB-600 aluminium profile system cross-section

    TB-600

    TB-600 is the thermal-break hinged window and door series of Gulfex (Gulf Extrusion LLC). The profile is extruded in Dubai, and the same maker covers sliding, folding and curtain-wall systems

    Learn more about TB-600
  • ALUK aluminium profile system cross-section

    ALUK

    ALUK is an Italian aluminium systems brand known for slim, minimalist frames that maximise glass area without compromising strength. Perfect for architectural projects that call for a light, contemporary look

    Learn more about ALUK
  • Vetromax glazing system profile

    Vetromax

    Vetromax combines advanced glazing technology with aluminium framing for maximum light, strength and energy efficiency. A modern solution for panoramic windows and glass facades

    Learn more about Vetromax
  • REHAU uPVC profile system cross-section

    REHAU

    REHAU uPVC systems are engineered in Germany for outstanding thermal insulation, soundproofing and long-term durability. A proven choice for energy-efficient windows and doors worldwide

    Learn more about REHAU

We are always happy to welcome you at our showroom

Main Office

Dubai, Showroom

The Pinnacle Building, Sheikh Zayed Road, Office 607

Mon–Fri: 9:00 – 18:00

+971 50 220 6913

Showroom

Samples to see in person

Profiles, glass units and hardware to see and touch before you choose.

Dubai, Showroom The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions