Skip to content
Tall lift-and-slide glass leaf partly open in a sea-facing Dubai penthouse, flush threshold meeting oak flooring
  • SLIDING SYSTEM
  • VETROMAX

Vetromax Vetro Slide

Vetro Slide is Vetromax's minimal aluminium sliding system for large glass: a 22 mm visible profile, glass panels up to 3 × 6 m (width × height) and leaves up to 1500 kg each. The bottom track is concealed, layouts run to up to 5 tracks, panels can pocket into the wall or meet at a free corner with no post, and operation is manual or motorised. In the UAE it goes into penthouses and villas on the water.

  • 22 mm Visible profile width
  • up to 5 (channels) Number of tracks
  • Class 7A Watertightness
Get a price

Technical data

Minimal aluminium sliding system for large glass panels, with a concealed bottom track, multi-track layouts, pocketing and a free-corner option; manual or motorised.

Values are the manufacturer's published figures for the series; the actual value depends on the configuration — glass, size and hardware. Which series fits your opening is settled at the free survey.

Manufacturer data
System type
Sliding system
Material
aluminium
Opening
multi-track sliding, pocket sliding
Visible profile width
22 mm
Maximum glass panel
3 x 6 m (up to, width x height)
Leaf weight
up to 1500 kg (per leaf)
Number of tracks
up to 5 (channels)
Watertightness
Class 7A

Minimal sliding systems exist to make a glass wall look as if it had no frame at all; Vetromax lists the Palm Jumeirah fronds and the Jumeirah Gate Building among its regional projects. We fabricate Vetromax profiles to the manufacturer's specification at our Dubai factory and install them ourselves.

Where Vetro Slide belongs

Openings where the glass is the room's fourth wall: a penthouse living room above the Marina, a beach villa facing the sea, a corner where two glass walls meet and the free-corner option removes the post. Panels up to 3 × 6 m (width × height) mean few joints across the view, and with a visible profile of 22 mm the meeting lines barely register. Pocketing lets the panels disappear into the wall, so the opening is genuinely clear.

What minimal means in heat, sand and wind

Leaves up to 1500 kg are heavy by any measure: beyond a certain size a motorised drive is the practical choice, and the structure has to carry that weight at the track. Watertightness is published as class 7A; on an exposed upper floor we check it against the wind-driven rain that elevation can see.

The concealed bottom track sits below the floor finish, which is exactly where sand collects; it needs drainage designed with the floor and a cleaning routine after dust storms. A thin frame also leaves the heat to the glass: solar-control coatings and laminated panes are chosen by orientation, because on a west-facing wall almost all of the load comes through the glass.

Vetro Slide, HS 80P or Vetro Facade

Vetro Casement HS 80P is the hidden-sash system for windows and hinged doors, with air permeability class 4, watertightness class E1200 and wind load class C5 — tighter classes for exposed elevations. Vetro Facade VF CW 35C is the curtain wall with 35 mm mullions and transoms and glass panels up to 2.8 × 5 m (width × height) for glass that does not need to move. Vetro Slide is for the part of the wall that must open.

Vetro Slide is the Vetromax system for glass walls that open: its value is the 22 mm line and the very large panels, and its care points are the weight and the concealed track.

Other Vetromax systems

Other series from the same range — compare the figures before the survey.

  • Facade · fixed curtain wall · integrates the brand's casement and top-hung windows, doors and pivot doors

    Vetromax Vetro Facade VF CW 35C

    Thermally broken aluminium curtain wall with 35 mm mullions and transoms, supplied as cover-cap, structural-silicone or hybrid facade; integrates the brand's windows and doors.

    Mullion / transom width
    35 mm (depths vary)
    Maximum glass panel
    2.8 x 5 m (width x height)
    Structural performance test load
    ±2000 Pa (ASTM E 330-14)
    Static water penetration test pressure
    720 Pa (ASTM E 331-00 (2016))
    Air infiltration test pressure
    300 Pa (ASTM E283 / E283M-19)
Modern villa with panoramic aluminium glazing and a pool at sunset

Get a price for this system

Send the opening sizes or a photo — we reply in WhatsApp within 15 minutes, and an engineer measures on site within 48 hours, free.

The honest downside

When Vetro Slide is the wrong system

Minimal sliding is about looks and size, not the tightest seal. Its watertightness class 7A sits below the E1200 of Vetromax's own hidden-sash casement, and a sliding joint does not press its seals the way a closed casement does. On a very exposed upper floor, or in a room where dust has to stay out whatever happens, that matters.

For windows in those positions take Vetro Casement HS 80P: slim hidden-sash frames, wind load class C5 and watertightness E1200. Keep Vetro Slide for the openings where a moving glass wall is the whole point.

Consider instead Vetromax Vetro Casement HS 80P

Frequently asked questions

Glass panels go up to 3 × 6 m (width × height), with leaves up to 1500 kg each. In practice the limit is delivery and lifting: a pane that size has to reach its floor through the building or by crane, so we plan access before fixing the panel layout.

Both are available. Smaller leaves slide by hand; large ones towards the upper end of the weight range are better motorised, which also means planning power, controls and service access with the builder.

From a free survey and the architect's drawings where they exist. An engineer is on site within 48 hours to measure the structural opening, check the floor build-up for the concealed track and plan the route for the glass; the quote separates leaves, glass, track and drive. Photos on WhatsApp get a reply within 15 minutes.

Profile Systems

  • Schuco aluminium profile system cross-section

    Schuco

    Schüco aluminium systems carry large panes on slim frames — for villas, apartments and offices where the view matters.

    Learn more about Schuco
  • GUTMANN aluminium profile system cross-section

    GUTMANN

    GUTMANN systems are offered by Gutmann Middle East LLC, based in Dubai Investments Park: hinged windows and doors, sliding and lift-and-slide doors, curtain walls and glass railings

    Learn more about GUTMANN
  • Deceuninck uPVC profile system cross-section

    Deceuninck

    Deceuninck uPVC profiles are designed in Belgium for superior insulation, weather resistance and a sleek finish. A popular choice for energy-efficient homes across Europe

    Learn more about Deceuninck
  • Cortizo aluminium profile system cross-section

    Cortizo

    Cortizo aluminium systems combine precise Spanish engineering with high thermal and acoustic performance. A reliable choice for windows, doors and facades that need to perform in demanding climates

    Learn more about Cortizo
  • Gulfex Montana 120 aluminium profile system cross-section

    Montana 120

    Montana 120 is a thermal-break sliding series from Gulfex (Gulf Extrusion LLC), with the profile extruded here in Dubai. A straightforward choice for sliding windows and balcony doors of ordinary size

    Learn more about Montana 120
  • Gulfex TB-600 aluminium profile system cross-section

    TB-600

    TB-600 is the thermal-break hinged window and door series of Gulfex (Gulf Extrusion LLC). The profile is extruded in Dubai, and the same maker covers sliding, folding and curtain-wall systems

    Learn more about TB-600
  • ALUK aluminium profile system cross-section

    ALUK

    ALUK is an Italian aluminium systems brand known for slim, minimalist frames that maximise glass area without compromising strength. Perfect for architectural projects that call for a light, contemporary look

    Learn more about ALUK
  • Vetromax glazing system profile

    Vetromax

    Vetromax combines advanced glazing technology with aluminium framing for maximum light, strength and energy efficiency. A modern solution for panoramic windows and glass facades

    Learn more about Vetromax
  • REHAU uPVC profile system cross-section

    REHAU

    REHAU uPVC systems are engineered in Germany for outstanding thermal insulation, soundproofing and long-term durability. A proven choice for energy-efficient windows and doors worldwide

    Learn more about REHAU

We are always happy to welcome you at our showroom

Main Office

Dubai — Showroom

The Pinnacle Building, Sheikh Zayed Road, Office 607

Mon–Fri: 9:00 – 18:00

+971 50 220 6913

Showroom

Samples to see in person

Profiles, glass units and hardware to see and touch before you choose.

Dubai — Showroom The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions