Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Glazing for hotels and restaurants
In hospitality the building keeps earning while you work inside it. A hotel releases one room at a time and wants it back the same evening; a restaurant offers the hours between the last table and the first delivery. The glazing has to answer both to the operator's brand standard and to the guest in the next room, which is why the sequence and the noise plan matter as much as the specification does.
- room by room sequence
- acoustic glazing option
- operator standard design basis
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
Glazing a hotel that stays open
- Walk-through with engineering and operations Which rooms are released, and when
- A mock-up room finished first One room approved before the rest begins
- Noise and dust plan issued to the hotel Neighbouring rooms and quiet hours agreed
- Full run made in our Dubai factory Started once the mock-up is signed off
- Installation floor by floor Crew access and badges agreed with security
- Room cleaned before it is handed back Housekeeping follows the crew out
What hospitality glazing has to satisfy
-
Operator standard
Design basis
Finish and hardware to the brand book
-
Acoustic interlayer
Glass
Road, plant and pool noise cut
-
Restricted travel
Guest safety
Sash opening limited where asked
-
Folding or sliding
Terraces
Open in the cooler months, sealed in summer
-
One room at a time
Sequencing
The room goes back into service
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Aluminium windows of any configuration
Made to size in our own factory in Dubai — in 3–5 weeks.
We will find convenient opening options:
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
The honest downside
When a hotel does not need new windows
Replacing windows in a hotel that stays open is slow, careful work: rooms taken out of inventory, neighbouring rooms held, a mock-up room approved before anything else. It is the right route when the frames themselves have failed, and a heavy one when they have not.
Many guest complaints come from the parts around the glass. Noise and dust from a hardened gasket, a sash that no longer pulls tight, or a misted unit in a sound frame are fixed by changing seals, adjusting hardware or replacing the glazing unit alone, often without the room leaving service for long.
Where the frames are sound, that repair route is quicker, quieter and far less disruptive. A full reglazing earns its place when the profile has no thermal break, the brand standard has changed or the rooms need acoustic glass the old frames cannot carry.
Consider instead
Seal replacement
Frequently asked questions
Yes, and that is how these jobs are planned. A room comes out of inventory in the morning, the old unit is removed, the new frame is set, sealed and cleaned, and the sequence is planned so that housekeeping can take it back the same evening. The floor keeps trading around the few rooms in work, rather than a wing being blocked for a month.
Some of it, and the hotel decides when. Cutting and drilling are confined to the hours operations agrees, the rooms either side of the work are usually held for the day, and screens keep dust out of the corridor. On a resort we plan the noisy elevations around the pool timetable rather than around ours.
Yes, and that is the point of glazing it this way. Folding or sliding walls stand fully open from November to March and turn the terrace back into part of the dining room; in summer the same walls seal and the space runs on the cooling. The frames are specified for a floor that is washed down every night.
Usually two parties. The operator's brand standard sets the finish, the hardware and often the glass, and the owner's consultant approves the shop drawings against it. We prepare submissions and physical samples in the format the brand team is used to reviewing, which is what keeps a refurbishment from stalling at approval stage.
Related pages
Nearby pages and the rest of the catalogue.
- All-glass corners
- Aluminium railings
- Balcony glazing
- Balcony glazing upgrade
- Cassette facades
- Conservatories
- Curtain wall
- Floor-to-ceiling glazing
- Frameless balcony glazing
- Frameless glazing
- Garden rooms
- Glass balustrades
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 