Apartments and penthouses
In a tower nothing starts until the building says yes. The owners' association wants a method statement, a risk assessment and a named crew before the first panel is carried through the lobby, and the service lift is booked by the hour like everything else in the building. Panel size is limited by what fits that lift — anything longer is craned onto a balcony or split into more sashes while the drawing is still on the screen. And the wind figure used in the calculation on the fortieth floor is not the one used on the second.
- association approval before anything starts
- lift or crane how panels arrive
- from inside the room installation
Advantages of working with us
-
In-house production
Windows, doors and glazed structures are made at our own factory in the UAE. Manufacturing takes 3–5 weeks from the survey, and the dates are written into the contract.
-
Room measurement
After a free consultation, an engineer comes to measure within 48 hours and answers the technical questions on site — openings, profile, glass and hardware.
-
Delivery of products
We deliver with our own transport across Dubai and all Emirates, and the installation date is agreed in advance so the crew arrives with the finished units.
-
Installation on site
A "clean" installation is carried out – all construction debris is removed, and dust and dirt are cleaned. Work can be conducted with or without your presence. The date and time are discussed individually.
-
Guarantee
The structures we make and the installation our crews carry out are covered by one warranty under one contract. The profile system also carries the manufacturer's warranty — up to 20 years, depending on the system.
-
Service
Warranty cases are handled by the same crews that did the installation: send the address and photos, and in most cases we can say before the visit whether it is an adjustment, a gasket or a glass unit.
How a flat or penthouse is done
- Survey inside the apartment Engineer on site within 48 hours
- Method statement and NOC prepared Filed with the owners' association
- Lift slot and access route booked Lobby, corridor and lift car sheeted
- Panels sized to the way in Split at the drawing stage if needed
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Room by room, sealed each evening The apartment stays lived in throughout
What working in a tower dictates
-
Method statement
Building file
NOC, trade licence, named crew
-
Booked by the hour
Service lift
Walls and floors protected first
-
Fits the lift
Panel size
Or craned onto the balcony
-
Taken at your floor
Wind load
Higher than at street level
-
Set by the building
Working hours
Noisy stages inside that window
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Articles
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
The pack is fairly standard across towers here: a no-objection certificate for the works, a method statement with a risk assessment, our trade licence, the names and identity documents of the crew coming upstairs, the booked lift slot, and the hours in which drilling and cutting are allowed. Some associations also hold a refundable deposit against damage to common areas. We assemble all of it while the drawing is being approved, so nobody is turned back at the lobby on the day.
The service lift is measured before the panel is drawn — its car dimensions and its load limit are as much a design constraint as the opening itself. What does not fit is either split into more panels while the drawing can still be changed, or craned onto the balcony where the building allows a lift over the facade. Glass is moved with suckers and a trolley, never carried by hand through a corridor.
One opening is worked at a time and never left open overnight. Temporary edge protection goes up before the old unit comes out, the crew works from inside the room on harnesses anchored to the structure, and everything that could be caught by the wind is tethered. If the wind picks up beyond the limit in the method statement, that opening is closed and the stage waits — which is why the programme allows for it.
In scale and exposure, yes. The glazing runs taller, roof terrace doors come into the package, and the wind pressure at that level usually pushes the specification towards thicker units and more frequent mullions — which in turn changes how the panels are lifted. Penthouses are also more likely to have their own roof access, so occasionally a crane can reach an opening the service lift cannot.
Related pages
Nearby pages and the rest of the catalogue.
Sections
Company
We are always happy to welcome you at our showroom
Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 