Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Saadiyat Island
A villa on Saadiyat sits on the open sea rather than a lagoon, and that changes what the glazing has to survive rather than how it looks. Salt arrives as spray on the first line and as damp air a street back; it finds the fixings and the hardware long before it touches the frame itself. The other constraint is the district: the island is master-planned and its beach communities hold their elevations to an agreed look, so the frame colour and the sightlines are settled against that before anything is cut. Low-rise plots mean the whole house is read from the shore path, and there is no rear elevation to leave plain.
- marine grade hardware and fixings
- agreed elevation district look
- 48 hours engineer at your villa
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
How a Saadiyat villa is glazed
- Survey walked from the beach side and the road Engineer on site within 48 hours
- Community design rules checked before the drawing Colour and sightlines agreed first
- Hardware and fixings specified for salt exposure Stainless where spray reaches
- Access and lifting planned around a low-rise plot Nothing heavy stands on soft ground
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Handover with a rinsing routine for the coast The one habit that decides how it ages
What the open sea changes
-
Stainless
Fixings and gear
Salt air carries well past the first line
-
Marine class
Powder coating
Specified where spray carries
-
All of them
Elevations on show
Read from the shore path
-
Solar control
Glazing unit
Reflected light off sand and water
-
Drained frames
Humid air
Moisture leaves the chamber
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Brands we work with
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
On the first line, yes — and it is the hardware that notices, not the aluminium. Spray off the open sea carries further than it does inside a lagoon, so rollers, hinges, screws and handle fixings are the parts that stiffen and stain first. Specifying stainless for those and a coating rated for marine exposure costs little at the order and is the difference between a frame that still works and one that is fought with. A street back from the beach the exposure drops, but the air is still damp, so the same fixings are usually kept.
They limit how it looks from outside rather than what it does. Saadiyat communities hold their elevations to an agreed appearance: frame colour, the depth of the sightline, sometimes the way an opening reads from the street. None of that stops a thermal break, a solar-control unit or a wider sliding leaf — it decides the finish and the geometry. We take the rules at the survey and draw against them from the start, because a drawing that has to be redone once it has been submitted pushes the whole order back, and the factory slot with it.
One chosen for reflected light, not only direct sun. Sand and water throw light upward, so a room can be uncomfortable at an hour when the sun is nowhere near that facade. A solar-control coating handles the load, and the choice of how much light it keeps is made on your own elevation with samples rather than from a table. Where the view is the point, the coating is picked to stay as neutral as possible so the sea does not read tinted.
Yes, and on a villa it is usually done elevation by elevation. Each face is surveyed, made and fitted as its own package, so the house stays lived in and only one side is open at a time. Nothing is left unglazed overnight: the old frame comes out in the morning and the new one is sealed before the crew leaves. Where an elevation is entirely glass, the order of panes is agreed at the survey so that no opening waits for the next visit. Frames and tools are staged on the plot rather than in the house, and the old units go off site with the crew.
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 