Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Al Raha Beach
Al Raha Beach is water and low-rise together: apartment blocks and townhouses along a canal, with balconies that look straight at it. The humidity that comes with that is what most enquiries are really about — a hard-cooled room on one side, damp canal air on the other, and an aluminium frame without a thermal break carrying the cold straight through, so on a still morning the outer face of the frame runs with water. The resident sees a wet window rather than a specification problem. The second factor is that the elevations face each other across the water, so privacy is decided by where the screening sits rather than by darkening the glass. Access is managed: the community sets hours and routes.
- thermal break what stops condensation
- across the water who sees in
- 48 hours engineer at your address
Advantages of working with us
-
In-house production
Windows, doors and glazed structures are made at our own factory in the UAE. Manufacturing takes 3–5 weeks from the survey, and the dates are written into the contract.
-
Room measurement
After a free consultation, an engineer comes to measure within 48 hours and answers the technical questions on site — openings, profile, glass and hardware.
-
Delivery of products
We deliver with our own transport across Dubai and all Emirates, and the installation date is agreed in advance so the crew arrives with the finished units.
-
Installation on site
A "clean" installation is carried out – all construction debris is removed, and dust and dirt are cleaned. Work can be conducted with or without your presence. The date and time are discussed individually.
-
Guarantee
The structures we make and the installation our crews carry out are covered by one warranty under one contract. The profile system also carries the manufacturer's warranty — up to 20 years, depending on the system.
-
Service
Warranty cases are handled by the same crews that did the installation: send the address and photos, and in most cases we can say before the visit whether it is an adjustment, a gasket or a glass unit.
How a Raha Beach address is glazed
- Canal elevation surveyed on its own Engineer on site within 48 hours
- Thermal break specified against condensation Neither face of the frame gets cold enough to sweat
- Screening decided behind the glass, not in it Blinds in the reveal rather than a dark unit
- Community approval and access route agreed Hours, lift and delivery route confirmed in advance
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Handover with drainage points shown Blocked outlets are where most complaints start
What the canal changes
-
Polyamide
Thermal break
Each face stays near its own air
-
Drained, vented
Frame chambers
Moisture has a way out
-
Across the water
Privacy
Neighbours face you, not a fence
-
Off the canal
Glare
Reflected light arrives low
-
Community rules
Access
Hours and routes are set
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
Because part of the frame is colder than the air touching it. The room is cooled hard, the air off the canal is warm and full of moisture, and an aluminium profile without a thermal break conducts the room's cold straight through to its outer face. On a still, humid morning that face drops below the dew point of the outside air and water forms on it, exactly as it does on a cold glass left on a table. A polyamide bar inside the profile separates the two halves, so each stays close to the air on its own side and neither gets cold enough to sweat. Drained, vented chambers let anything that does form run out instead of sitting in the section, and a tight sealing line keeps the damp air out of the room.
By putting the screening behind the glass. Buildings face each other across the canal, so the rooms nearest the water are the ones that are seen into, and a reflective unit only works by day. After dark it reverses: the lit room becomes the display and the water outside becomes the mirror. So the glazing is chosen for the sun and the glare that comes off the canal low in the morning and evening, and the privacy is handled with blinds or a screen in the reveal, which you can control by the hour instead of living with a permanently darker room. Where a balcony is glazed, the same rule holds: a clear unit with screening inside it, not a tinted one that makes the balcony read as a black box from across the water.
It controls the appearance and the access, not the specification. A managed waterfront community keeps its elevations consistent, so the frame colour and the way an opening reads from outside are agreed rather than chosen freely, and working hours, lift use and delivery routes are set by management rather than by us. We take both sets of rules at the survey and draw against them from the start, because a drawing that has to be resubmitted pushes the factory slot back with it. None of it prevents a proper thermal break, drained frames or the glass unit the elevation needs; those sit inside the profile and are invisible from the water. What the rules do decide is the finish and the geometry, and that is settled before anything is cut.
It depends on what is there, and we say which of two cases it is at the survey, in writing, before anything is quoted. If the frame is straight, the hardware still carries the leaf and the trouble is stiffened gaskets, a misted unit or a track that no longer drains, that is a service job and costs far less than replacement. If the profile has no thermal break and the outer face sweats every humid morning, no amount of servicing will change that, because the cause is in the section itself, and the honest answer is a new frame. A balcony on the canal side also takes the reflected light and the damp air first, so it is usually the elevation where the difference between the two cases shows earliest.
Brands we work with
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
- MBR City
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 