Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Bur Dubai
In the older blocks of Bur Dubai a window opening rarely holds only a window. Somewhere in it, or in the wall beside it, there is an air conditioner sitting in a sleeve, an extract fan cut into a pane, cabling that was run through the frame years ago and a condensate pipe staining the render below. All of it has to be dealt with on the day the old frame comes out, and it is the part that turns a straightforward replacement into an afternoon of improvisation when nobody has looked first. So we survey the opening as a piece of the building's services and say at the quote what becomes of each thing we find.
- more than glass what the opening holds
- settled at the quote what happens to each
- closed before we leave the wall
Profile Options
Consult with a specialist
Profile finish and coating options
Powder coating in any shade of the RAL palette; the colour is confirmed against a physical sample at the survey.
Anodising builds an oxide layer on the profile itself, so the colour belongs to the metal rather than to a film on top of it and cannot peel.
Wood-grain and stone-effect finishes are transferred onto the powder coating. The profile keeps the strength of aluminium and never needs repainting.
Available colours (200+ RAL shades)
- White
- Anthracite
- Brown
- Black
- Grey-anthracite
- Grey
Anodised finishes
- Natural silver
- Champagne
- Light bronze
- Medium bronze
- Dark bronze
- Black anodised
Wood-grain and special effects
- Golden oak
- Walnut
- Dark oak
- Concrete
- Basalt
- Wenge
How an occupied flat is replaced
- The opening surveyed with everything in it An engineer is with you inside 48 hours
- Every service in the wall listed and priced Nothing discovered halfway through the day
- Cooling kept running while work goes on A unit is moved, not switched off for a week
- One room opened at a time The family stays in the flat throughout
- Made in our Dubai factory Three to five weeks once the drawing is signed
- Every opening closed and made good before we leave Nothing left boarded overnight
What comes out with the old window
-
Sitting in a sleeve
Through-wall unit
A hole that is kept, moved or closed
-
Cut into the pane
Extract fan
Rehoused in a panel, not improvised
-
Run through the frame
Old cabling
Traced before anything is cut
-
Down the render
Condensate pipe
Given a route that stops the staining
-
Facing the street
Ground-floor flats
Laminated glass and restricted opening
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Aluminium windows of any configuration
Made to size in our own factory in Dubai — in 3–5 weeks.
We will find convenient opening options:
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
Yes, and there are three honest routes. The unit stays and the new window is made around it, with a proper insulated panel built into the frame instead of the sheet of board that is probably there now. The unit moves to the wall beside the opening, which gives you the whole window back and needs a core drilled. Or the cooling is changed to a split system and the hole is closed for good. Which one you choose has to be decided before manufacturing, because the frame is made around that decision rather than adapted to it afterwards.
It gets its own panel, because a modern sealed glass unit cannot be drilled — the two panes are bonded around a spacer with dry air between them, and cutting into that ends the unit. So the fan sits in an insulated panel within the new frame, or moves into the wall, and either way it is drawn before anything is made. The same applies to anything else somebody has put through the old glass over the years, from a cable to a flue.
One opening. The room being worked on is sheeted and closed off from the rest of the flat, the old frame comes out, the new one goes in and is sealed, and the room is cleaned and handed back before the crew leaves. Nothing is left as a hole overnight and nothing is left boarded up over a weekend. In a flat of the usual size this means a few days of one room being out of use, rather than a family moving out.
It is, and it is worth doing properly. Laminated glass holds together when it is hit — the interlayer keeps the pane in the frame instead of on the floor — which buys time, and it helps with the street noise at the same time. Beyond that it is hardware: a locking handle, multi-point locking on the larger sashes, and a restrictor so a window can be left open a crack at night without being an invitation. What we will not tell you is that a window makes a flat secure; it is one layer, and it should be specified as one.
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
- MBR City
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 