Windows in Fujairah
Fujairah faces the Gulf of Oman with the Hajar mountains standing directly behind it, and the air on this coast is heavy with moisture rather than merely salty. Run a bedroom at full air conditioning behind an old one-piece aluminium frame and by morning there is water sitting on the inside of the metal. The rain of the cooler months comes off the sea sideways and down the wadis in short heavy bursts, so where the frame sends that water matters more than which glass is in it. The property is low and wide — resort blocks and private houses — so openings tend to be long runs of glass rather than tall panels.
- thermal break against condensation
- drained and vented for driven rain
- long and low typical opening
What the east coast asks of a window
-
Polyamide break
Profile
Inner face near room temperature
-
Warm-edge spacer
Glass unit
The cold line moves off the pane edge
-
Drained chambers
Frame
Driven rain pushed back out
-
Stainless
Hardware
Damp salt air reaches the metal
-
Fixed lights and sashes
Layout
Wide glass, few moving parts
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Advantages of working with us
-
In-house production
Windows, doors and glazed structures are made at our own factory in the UAE. Manufacturing takes 3–5 weeks from the survey, and the dates are written into the contract.
-
Room measurement
After a free consultation, an engineer comes to measure within 48 hours and answers the technical questions on site — openings, profile, glass and hardware.
-
Delivery of products
We deliver with our own transport across Dubai and all Emirates, and the installation date is agreed in advance so the crew arrives with the finished units.
-
Installation on site
A "clean" installation is carried out – all construction debris is removed, and dust and dirt are cleaned. Work can be conducted with or without your presence. The date and time are discussed individually.
-
Guarantee
The structures we make and the installation our crews carry out are covered by one warranty under one contract. The profile system also carries the manufacturer's warranty — up to 20 years, depending on the system.
-
Service
Warranty cases are handled by the same crews that did the installation: send the address and photos, and in most cases we can say before the visit whether it is an adjustment, a gasket or a glass unit.
How a job on the east coast runs
- Survey with the exposure and the ventilation noted Engineer on site within 48 hours
- Condensation risk taken room by room A cold bedroom is not an open majlis
- Drainage detail set for wind-driven rain Sideways rain and runoff off the slopes
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Delivery planned as one run over the mountains Nothing arrives in pieces across the week
- The crew stays until the stage is closed No commuting back across the range each evening
Articles
Partitions
Office partitions made of aluminium profiles are a simple, quick, and cost-effective way to organise efficient zoning within a large space, while maintaining interior unity.
-
Aluminium office partitions with glass
-
Full-glass office partitions
-
Transformable partitions for the office
-
Accordion partitions for the office
Frequently asked questions
Partly, and it is fixable. Warm, wet coastal air meets metal that the air conditioning has chilled and gives up its moisture there — an old single-piece aluminium profile is one continuous cold bridge from outside to in, so the condensation lands on the frame before it lands anywhere else. A thermally broken profile puts a polyamide bar between the outer and inner halves, and the inner face then sits close to room temperature and stays dry; a warm-edge spacer does the same job around the edge of the glass unit. The remainder is ventilation — a room that is sealed and never aired will find a cold surface somewhere.
It changes the frame rather than the glass. Rain on this coast arrives with wind behind it and comes down off the slopes in short heavy bursts, so the real question is what happens to the water that gets past the outer seal — every aluminium window lets some in. The chambers are drained and vented so the pressure equalises and the water is carried back out at the sill instead of standing against the seal. That is a detail on the drawing, and it is the first thing a cheap frame leaves out.
The moving parts, not the frame. Gaskets held compressed in one position take a set, drainage slots silt up with dust blown off the mountains, and roller and hinge mechanisms dry out — so a house opened after a long summer feels stiff and draughty when nothing is actually broken. That is an adjustment and a clean rather than a repair, and it is worth booking before the season starts instead of in the middle of it.
It changes how a day is organised, not the lead time. Everything for a stage is loaded and driven across in one run rather than trickled over in van loads, and the crew stays on site until that stage is finished instead of driving back each evening. The survey still happens within 48 hours, and manufacturing is the same three to five weeks from the signed drawing as it is anywhere else in the country.
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
Sections
Company
We are always happy to welcome you at our showroom
Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 