Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Windows in Al Ain
Al Ain sits inland among the oases, with no coast anywhere near it, and that removes the one factor that governs a specification everywhere else in the country. With no salt in the air the finish stops being a survival decision and becomes a design one — the whole powder-coating palette is open, and what a seafront villa spends on anodising and stainless goes into the profile and the glass instead. What takes the place of salt is the swing between a hard afternoon and a genuinely cool night, and the fine sand that comes off open desert. Most of the work is family compounds, where a majlis wing and the family house stand on one plot and want different things from the same window.
- full colour range the finish is a free choice
- day-to-night swing what the profile handles
- compound-wide how a plot is drawn
Why choose aluminium windows?
-
Durable EPDM seals
Three contours of EPDM seals keep the glass off the aluminium and close the gap between sash and frame, so dust, humid salt air and wind-driven rain stay outside.
Learn more -
Foamed thermal inserts
Foamed inserts fill the profile chambers and stop air circulating inside them, so less outside heat and street noise passes through the frame into the cooled room.
Learn more -
Polyamide thermal breaks
Glass-filled polyamide thermal breaks up to 40 mm wide keep the outer and inner shells apart, so the frame holds its shape and its insulation through a UAE summer.
Learn more -
Energy-efficient double glazing
Double glazing up to 60 mm thick puts a sealed gap of still air or gas between the hot street and the cooled room, so less heat crosses the glass into the room.
Learn more
How a compound is specified
- Survey covering every building on the plot Engineer on site within 48 hours
- Exposure recorded as inland Finish and fixings chosen on that basis
- Majlis and family house specified apart Same colour outside, different glazing inside
- Glazing set elevation by elevation The afternoon side is not the courtyard side
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Installed and adjusted by our own crews Hardware set with the seasonal swing in mind
What being inland changes
-
Full RAL range
Powder coating
No marine penalty to pay here
-
Thermal break
Profile
Hard afternoon, cool night
-
Solar control
Glazing
Unshaded desert light
-
Compression checked
Seals
Fine sand off open ground
-
Room to move
Long profiles
Metal expands and contracts daily
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
It changes what the money is spent on. Along the coast a large part of the specification exists purely to survive salt — anodising or a marine-grade coat, stainless screws and hinge pins, a frame detailed so nothing sits wet in a chamber. Inland none of that is being fought, so the finish becomes a question of how the house should look and the full powder-coating palette opens up. The drivers here are different ones: a wide daily temperature swing, hard unshaded sun and fine sand, and those are answered in the profile, the glass unit and the sealing contours rather than in the coating.
Two things, and neither is a fault in the door. Aluminium expands as it heats and pulls back as it cools, and a long sliding leaf on a west elevation moves between an afternoon and a night — the frame is set with clearances that allow for that, and one fitted tight against the reveal will complain every summer. The second is the tracks: fine sand settles in the bottom channel and under the rollers and turns a light leaf heavy. A clean-out and an adjustment sorts most of it, which is why hardware here is chosen so it can be adjusted rather than sealed shut.
Stop the heat at the glass instead of removing it afterwards. A solar-control unit reflects and absorbs part of the sun's energy at the pane, and it belongs on the west and south elevations where the afternoon lands; the courtyard and shaded sides keep a clearer unit so the rooms do not go dim. Applied film on an old single pane is the wrong tool — it does nothing about the frame, and an untreated aluminium frame conducts heat straight through the wall on its own. Deep reveals and external shading in the architecture still do more than any glass specification can.
No — it is normal on a compound and it is drawn as one set. The majlis is a guest room used mostly in the evening, so it usually wants height, generous glass and a clear view over the courtyard; the family side wants privacy, higher sills and less exposure towards the road. Both take the same external colour, the same profile system and the same hardware family, so the compound reads as one property from outside while each building behaves the way it is actually used.
Brands we work with
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
Sections
Company
We are always happy to welcome you at our showroom
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 