Windows in Ajman
Ajman is small enough to cross in a morning and is built almost entirely of mid-rise blocks and two-storey townhouses. That changes who makes the call: here it is often the owner of a whole building rather than of one flat, so the work arrives as a floor or an elevation and is staged around which flats happen to be empty. Nothing here reaches tower height, so no cradle is involved and the crews work from inside the rooms. And it is nearly always replacement — new frames going into openings a builder left decades ago, not into a fresh wall.
- a floor at a time how work is staged
- repeated types what we manufacture
- no cradle needed mid-rise access
Advantages of working with us
-
In-house production
Windows, doors and glazed structures are made at our own factory in the UAE. Manufacturing takes 3–5 weeks from the survey, and the dates are written into the contract.
-
Room measurement
After a free consultation, an engineer comes to measure within 48 hours and answers the technical questions on site — openings, profile, glass and hardware.
-
Delivery of products
We deliver with our own transport across Dubai and all Emirates, and the installation date is agreed in advance so the crew arrives with the finished units.
-
Installation on site
A "clean" installation is carried out – all construction debris is removed, and dust and dirt are cleaned. Work can be conducted with or without your presence. The date and time are discussed individually.
-
Guarantee
The structures we make and the installation our crews carry out are covered by one warranty under one contract. The profile system also carries the manufacturer's warranty — up to 20 years, depending on the system.
-
Service
Warranty cases are handled by the same crews that did the installation: send the address and photos, and in most cases we can say before the visit whether it is an adjustment, a gasket or a glass unit.
How a building is done floor by floor
- Survey of a sample flat and the elevation Engineer on site within 48 hours
- Every opening measured, never copied Sizes drift between floors and wings
- Opening types numbered and counted Repeats made together, sizes stay individual
- Sequence agreed against the tenancy calendar Empty flats first, occupied ones by appointment
- Manufacturing in our Dubai factory Three to five weeks from the signed drawing
- Old profiles taken away as scrap metal Aluminium goes back into the melt
What an Ajman building needs
-
Owner of the block
Who orders
One decision covering many flats
-
Measured one by one
Openings
Even in identical flats
-
Numbered by type
Production
Repeats grouped into one run
-
Worked from the room
Access
Mid-rise, so no cradle
-
Held across the elevation
External colour
The street face stays one
Let's calculate
the cost of glazing
Get a free calculation for your windows — just leave your number, we'll reply on WhatsApp within 15 minutes.
Articles
Pricing
Aluminium Windows and Doors Calculator
Choose the options — we’ll send the price on WhatsApp
What are we making
Shape and opening
Size
Width and height: 300–6000 mm. Not sure? Clear the fields — we’ll measure at the free survey.
Width under 300 mm — check that it is in millimetres.
Width over 6000 mm — we’ll confirm it at the survey.
Height under 300 mm — check that it is in millimetres.
Height over 6000 mm — we’ll confirm it at the survey.
Enter a whole number of units, 1 or more.
Glazing unit
Extras
Do you need a windowsill?
Do you need a coloured profile?
Do you need installation?
Frequently asked questions
That is how most of it is done here. The elevation is split into stages, the empty flats are taken first while the sequence is proved, and occupied ones are booked individually — an opening is stripped, the new frame set and sealed, and the room closed again before the crew leaves. Because the same type repeats up the building, each stage runs faster than the one before it, and nobody's air conditioning is off overnight.
Yes, and it is not caution for its own sake. Blockwork, plaster thickness and the position of the old frame in the reveal drift between floors and between wings, and a window cut to the size of the flat below arrives either too tight to fix or too loose to seal. What actually repeats is the type — profile, opening direction, glass unit, hardware — and that is what gets grouped into one production run. The dimensions stay individual.
They leave the site as scrap metal rather than as building rubble. Aluminium can be melted and rolled again without losing its properties, which is the same reason it survives on a facade in this climate, so the stripped profiles go to a recycler. The sealed glass units travel separately — frame and unit are not the same material stream, and mixing them wastes both.
Rarely. In rented flats the brief is durability and easy adjustment, because the sashes are handled by whoever is living there this year. A townhouse ground floor usually wants a wider opening onto its own yard, which becomes a sliding door with laminated glass rather than a casement, while the upper floor keeps ordinary sashes. Both are drawn as one set so the external colour and the sightlines still match across the plot.
Related pages
Nearby pages and the rest of the catalogue.
- Al Furjan
- Al Quoz
- Al Raha Beach
- Al Reem Island
- Arabian Ranches
- Bur Dubai
- City Walk
- Discovery Gardens
- Dubai Hills Estate
- Emirates Hills
- Jumeirah Islands
- Jumeirah Village Triangle
Sections
Company
We are always happy to welcome you at our showroom
Main Office
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Mon–Fri: 9:00 – 18:00
Showroom
Samples to see in person
Profiles, glass units and hardware to see and touch before you choose.
Dubai — Showroom
The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions 