Skip to content
Flush structurally glazed showroom facade in Dubai with dark glass and thin silicone joints between panes
  • FACADE SYSTEM
  • DECEUNINCK

Deceuninck Decalu F50

Decalu F50 is Deceuninck's stick curtain wall with equal 50 mm sightlines, published for buildings up to 18 m high. It works with Decalu windows, doors, vents and brise soleil, so a low- or medium-rise front can be glazed in one family. In the UAE it fits showrooms, clinics, schools, low office blocks and tall villa glass walls; the published Uf is from 0.78 W/m²K.

  • from 0.78 W/m²K Uf
  • up to 18 m Building height
Get a price

Technical data

Stick curtain wall with 50 mm sightlines for low- to medium-rise commercial buildings, compatible with Decalu windows, doors, vents and brise soleil.

Values are the manufacturer's published figures for the series; the actual value depends on the configuration — glass, size and hardware. Which series fits your opening is settled at the free survey.

Manufacturer data
System type
Facade system
Material
aluminium
Opening
curtain wall
Sightline
50 mm (equal sightlines)
Uf
from 0.78 W/m²K
Building height
up to 18 m
Watertightness
1500 Pa (PN-EN 12155:2004)
Wind resistance
1600 Pa (PN-EN 12179:2004)

A stick curtain wall is built on site from vertical mullions and horizontal transoms, with the glass fixed into the grid; F50 is that idea within the Decalu line. We fabricate Deceuninck profiles to the manufacturer's specification at our Dubai factory and install them ourselves.

What F50 is for

Buildings where the glass wall is a few storeys tall rather than a tower: a car showroom, a clinic or a nursery, a low office block, a mall extension, a stairwell glazed from ground to roof. The published limit of up to 18 m in building height sets the scope clearly. Within it, equal 50 mm sightlines give a regular grid inside and out, and because Decalu windows, doors and vents fit into the same facade, opening lights and entrances do not need a second system with different lines.

Heat, wind and water on a glass front

Uf from 0.78 W/m²K is a frame value, and on a curtain wall it matters: a facade is a lot of aluminium grid, and an insulated one keeps that grid from becoming a heat bridge between a hot exterior and a cooled interior. The glass still carries most of the load, so the build-up is chosen per orientation — solar-control coating on the south and west, often simpler glass on the north.

Watertightness of 1500 Pa (PN-EN 12155:2004) and wind resistance of 1600 Pa (PN-EN 12179:2004) are the pressures the system was tested to. They are figures for comparison and for the engineer's calculation, not a promise for every building: the wind load on your facade depends on its height, exposure and location, and the bracket layout into the slab is calculated for it.

F50 with the Decalu windows and doors

Inside an F50 facade the openings come from the rest of the line: Decalu88 Standard windows with casement or tilt-and-turn sashes, Decalu101 Scand where the outer glass has to be reached from inside, Decalu88 Entrance Door for the way in. Staying within one family keeps the finish, gaskets and detailing consistent along the elevation, and it makes later maintenance simpler.

Decalu F50 is a sensible curtain wall for buildings within its published 18 m height, especially where the facade should carry Decalu windows and doors in the same line.

Other Deceuninck systems

Other series from the same range — compare the figures before the survey.

Modern villa with panoramic aluminium glazing and a pool at sunset

Get a price for this system

Send the opening sizes or a photo — we reply in WhatsApp within 15 minutes, and an engineer measures on site within 48 hours, free.

The honest downside

Where F50 stops

The published building height is up to 18 m. Above that — residential towers, hotel blocks, most of the skyline along the main roads — F50 is outside its data, and we would not stretch it. A stick system also means most of the work happens on site, floor by floor, which on a tall building costs time and access equipment that factory-made units avoid.

For a tower, look at unitised facades: panels assembled and glazed in the factory, lifted into place and joined floor by floor. For a small shopfront or a single glazed wall in a villa, a curtain wall may be more engineering than the opening needs, and a framed glazing system will do the job.

Consider instead Unitised facades

Frequently asked questions

Yes. Where a villa has a tall glass wall — a double-height living room, a stair tower — a curtain wall is often the natural way to glaze it, and equal 50 mm sightlines keep the grid even. The engineering is the same as on a commercial building: brackets, fixing into the structure and the wind calculation are done for that elevation.

A solar-control insulated unit is the usual starting point on the west, with laminated glass where people stand close to the facade or where it runs down to the floor. The frame side is covered by the Uf from 0.78 W/m²K; the heat that reaches the room is decided mostly by the coating, so we choose it per orientation.

From drawings and a survey. Send what you have — architectural drawings or photos — on WhatsApp and we reply within 15 minutes; an engineer then visits within 48 hours to measure the structure and check the fixing points. The quote separates the grid, the glass, the brackets and the inserted windows and doors.

Profile Systems

  • Schuco aluminium profile system cross-section

    Schuco

    Schüco aluminium systems carry large panes on slim frames — for villas, apartments and offices where the view matters.

    Learn more about Schuco
  • GUTMANN aluminium profile system cross-section

    GUTMANN

    GUTMANN systems are offered by Gutmann Middle East LLC, based in Dubai Investments Park: hinged windows and doors, sliding and lift-and-slide doors, curtain walls and glass railings

    Learn more about GUTMANN
  • Deceuninck uPVC profile system cross-section

    Deceuninck

    Deceuninck uPVC profiles are designed in Belgium for superior insulation, weather resistance and a sleek finish. A popular choice for energy-efficient homes across Europe

    Learn more about Deceuninck
  • Cortizo aluminium profile system cross-section

    Cortizo

    Cortizo aluminium systems combine precise Spanish engineering with high thermal and acoustic performance. A reliable choice for windows, doors and facades that need to perform in demanding climates

    Learn more about Cortizo
  • Gulfex Montana 120 aluminium profile system cross-section

    Montana 120

    Montana 120 is a thermal-break sliding series from Gulfex (Gulf Extrusion LLC), with the profile extruded here in Dubai. A straightforward choice for sliding windows and balcony doors of ordinary size

    Learn more about Montana 120
  • Gulfex TB-600 aluminium profile system cross-section

    TB-600

    TB-600 is the thermal-break hinged window and door series of Gulfex (Gulf Extrusion LLC). The profile is extruded in Dubai, and the same maker covers sliding, folding and curtain-wall systems

    Learn more about TB-600
  • ALUK aluminium profile system cross-section

    ALUK

    ALUK is an Italian aluminium systems brand known for slim, minimalist frames that maximise glass area without compromising strength. Perfect for architectural projects that call for a light, contemporary look

    Learn more about ALUK
  • Vetromax glazing system profile

    Vetromax

    Vetromax combines advanced glazing technology with aluminium framing for maximum light, strength and energy efficiency. A modern solution for panoramic windows and glass facades

    Learn more about Vetromax
  • REHAU uPVC profile system cross-section

    REHAU

    REHAU uPVC systems are engineered in Germany for outstanding thermal insulation, soundproofing and long-term durability. A proven choice for energy-efficient windows and doors worldwide

    Learn more about REHAU

We are always happy to welcome you at our showroom

Main Office

Dubai — Showroom

The Pinnacle Building, Sheikh Zayed Road, Office 607

Mon–Fri: 9:00 – 18:00

+971 50 220 6913

Showroom

Samples to see in person

Profiles, glass units and hardware to see and touch before you choose.

Dubai — Showroom The Pinnacle Building, Sheikh Zayed Road, Office 607
Get directions